EPM1602 - Gas Analyzer
For Petrol/LPG/CNG Vehicles
WaterSense helps detect any water content from the sampling system into the instrument
and turns off the pump and stops suction thus prolonging the life of the instrument.
Instrument is easily upgradable to measure concentration of 6 gases (NOx,
and SOx in addition to CO, HC, CO2 and O2).
The accuracy of the NDIR sensor depends upon temperature factors. Any change in the
temperature results in change in the measured values. AutoZero ensures to zero measured values for every 20
minutes by default or for every 2°C change in the temperature.
Automatically performs leak-check before any measurement thus aiding user to identify
leak if any. It also helps ensure accuracy of measurement.
Helps to switch on/off pump, solenoid valve etc automatically after the respective
functions are performed thus increasing the life of the instrument.
Checks various functional parameters like HC-residue, warm-up, leak, low flow etc.
Assists in detection of faults/failures like O2 sensor failure, NDIR sensor communication failure
Switches off the display after 5 mins of inactivity thus reducing power consumption.
Equipped with an USB (as well as RS232) interface for easy communication. USB serves as
a backup interface when RS232 interface fails. Moreover, present computers are not equipped with RS232 port.
Equipped with RPM sensors capable to measure RPM using Piezo/Battery/Acoustic/Vibration
principles thus ensuring zero downtime.
Wireless remote based on bluetooth technology averts use of cables (optional).
An optional wireless RPM sensor for smooth functioning.
Wireless dot-matrix printer for user-friendly operations (optional).
An android application to communicate between the instrument and any android mobile
phone. App can be downloaded from Google PlayStore.
A Windows/Android application for vehicle emission tests. Emitso is 2way communication
enabled thus helping operators use either the instrument or the PC while carrying out emission tests. Emitso
can send SMS reminders to vehicle owners to renew their emission test certificate. Emitso can generate MIS
reports for the use of PUC Centers.
|Measuring Gas Intake
||<5s (for sampling probe length of 3m)
|Warmup Time (≥25°C)
||Membrane keypad (3x4)
|Zero/Gas Span Calibration
||12VDC ±1.2V / 230VAC ±20%
||300 x 265 x 120mm
EPM1602 Gas Analyzer